Re: PC Ditto II -- speed?

Article View: comp.sys.atari.st

Article #38580

#38580

From: Daniel E. Wilson
Date: Mon, 08 May 1989 00:16

16 lines
1186 bytes

In article <537@TSfR.UUCP>, usenet@TSfR.UUCP (usenet) writes:
> In article <103@sdcc10.ucsd.EDU> cs163afu@sdcc10.ucsd.edu.UUCP (Some call me...Tim) writes:
> >The initial release of the IBM PC AT contained a 6Mhz 8086
> >processor.  It was only later that they upgraded to 8Mhz and still
> >later the 286 processor.
> 
>  Wrong.  The IBM PC AT started out at a 6mhz 80286 - IBM only upped the
> clock to 8mhz when everybody else on the planet was running 8mhz/10mhz/12mhz
> on their '286 boxes.

   This may be a shock to you but the PC AT was around long before the
80286 was created.  The AT started out with the 8086 and then went to
the 80186 for a greater clock speed.  Only in recent years has the 80286
been used in the clones.

Dan Wilson

Technical Details

Message-ID: <3944@tekcrl.LABS.TEK.COM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!tektronix!tekcrl!tekchips!danw

References: <8905021217.AA08520@nh.cs.wm.edu> <98@sdcc10.ucsd.EDU> <537@TSfR.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!tektronix!tekcrl!tekchips!danw
From: danw@tekchips.LABS.TEK.COM (Daniel E. Wilson)
Newsgroups: comp.sys.atari.st
Subject: Re: PC Ditto II -- speed?
Message-ID: <3944@tekcrl.LABS.TEK.COM>
Date: 8 May 89 00:16:39 GMT
References: <8905021217.AA08520@nh.cs.wm.edu> <98@sdcc10.ucsd.EDU> <537@TSfR.UUCP>
Sender: ftp@tekcrl.LABS.TEK.COM
Lines: 16

Reply to Parent Message