Article View: comp.sys.atari.st
Article #3962Re: Help with HD for ST
From: C.L. Freemesser
Date: Wed, 06 Sep 1989 00:07
Date: Wed, 06 Sep 1989 00:07
49 lines
2644 bytes
2644 bytes
In article <2444@jhunix.HCF.JHU.EDU> ins_bac@jhunix.UUCP (Ajay Choudhri) writes: >Hardrive. >Its sitting here in front of me, hoping it can be hooked up to my ST. >Well my questions are. >1) Does anybody know anything about Rodime 21meg HD model# RO204?? I have one running on my BBS. Great drive! >2) It has a card edge connector. One has 10 contacts, the other part has > 17 contacts, these two are separated by about a 1/2 inch. Is this > standar ST506?? or SCSI or ESDI. It is a standard ST506/412 drive, not a SCSI or ESDI drive. >3) If it is ST506, I am under the impression I can use Adaptecs 4070 or 4000a > controllers+host adaptor. can I do this for the others? Yep, I use an Adaptek 4000a with this drive. You can use practically any 506/412 drive on an Adaptek. > I mean if it is SCSI or ESDI, do I just need a Host Adaptor?? > or do I still need a controller. You need a controller. Like I said, it does not have an embedded controller. >4) I bought a case and power supply so thats no problem but does the adaptor >come with a DMA cable? The ICD Host Adapter I use comes with the DMA cable. However, you will have to get a 50 pin header-header cable, 32 pin card edge-header cable, and 20 pin card edge-header cable. The "10 and 17 pin card edge" you referred to are really 20 and 34. Look at BOTH sides of the card. Also pin 1 on each card connector is labeled. >5) Theres a wire trailing off this behemoth, is this a grounding wire?? I had no wire hanging off mine. Is it connected to the housing, or the circuit board? Also, the bank of four "pins" on the side of the drive are ID pins. However, pin 1 (if I remember) is on the right hand side. >thanks to everyone who can help me.. You're welcome. Chris Freemesser, Rochester Institute of Technology | What I like : BITNET: %clf3678@RITVAX GEnie: C.FREEMESSER | 1) My Atari ST USENET: Just reply and hope it gets through | 2) My '77 Mercury Call the ACORN BBS (716)436-3078, 300/1200 baud | 3) Coke Classic
Technical Details
Message-ID:
<1208@ultb.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!brutus.cs.uiuc.edu!usc!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!peregrine!ccicpg!cci632!rit!ultb!clf3678References:
<2444@jhunix.HCF.JHU.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!brutus.cs.uiuc.edu!usc!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!peregrine!ccicpg!cci632!rit!ultb!clf3678 From: clf3678@ultb.UUCP (C.L. Freemesser) Newsgroups: comp.sys.atari.st Subject: Re: Help with HD for ST Summary: No problem! Message-ID: <1208@ultb.UUCP> Date: 6 Sep 89 00:07:58 GMT References: <2444@jhunix.HCF.JHU.EDU> Reply-To: clf3678@ultb.UUCP (C.L. Freemesser) Distribution: usa Organization: Rochester Institute of Technology, Information Systems Lines: 49