Re: GnuEmacs 18.51 and Scrolling

Article View: comp.sys.atari.st

Article #39625

#39625

From: S.T. Organek
Date: Tue, 19 Dec 1989 00:19

6 lines
915 bytes

In article <1790@ultb.isc.rit.edu>, sto9719@ultb.isc.rit.edu (S.T. Organek) writes:

> not powerful enough because it couldn't position the cursor.   What I
> didn't know was that the ST saved files in most editors with a CR and LF
> and that GnuEmacs wanted the termcap saved with only LF ( 0x0d ), the extra 
> CR ( 0x0a ) was confusing the termcap reader in the editor.

Technical Details

Message-ID: <1791@ultb.isc.rit.edu>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!wuarchive!udel!rochester!rit!ultb!sto9719

References: <1790@ultb.isc.rit.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!wuarchive!udel!rochester!rit!ultb!sto9719
From: sto9719@ultb.isc.rit.edu (S.T. Organek)
Newsgroups: comp.sys.atari.st
Subject: Re: GnuEmacs 18.51 and Scrolling
Summary: A small oversight was made on my part LF = 0x0A, and CR = 0x0D,
  remove the CR from the termcap file
Message-ID: <1791@ultb.isc.rit.edu>
Date: 19 Dec 89 00:19:15 GMT
References: <1790@ultb.isc.rit.edu>
Organization: Information Systems and Computing @ RIT, Rochester, New York
Lines: 6

Reply to Parent Message