TOUCH UP QUESTION

Article View: comp.sys.atari.st

Article #4059

#4059

From: Greg Csullog
Date: Sat, 16 Sep 1989 03:29

10 lines
968 bytes

I HAVE TOUCH UP AND THE HAND SCANNER FROM MIGRAPH. FIRST, THE SCANNER IS
GREAT! I'M REALLY HAPPY WITH THE QUALITY OF COPY ON AN SLM804 LASER. BUT (ALWAYS
A BUT) I HAVE NOT HAD ANY SUCCESS MOVING FILES INTO MACPAINT (UNDER SPECTRE) OR
OF READING MACPAINT FILES INTO TOUCH UP. IS THERE SOMETHING SPECIAL THAT HAS
TO BE DONE?

IT TOOK ABOUT 1 MINUTE 45 SECONDS TO PRINT A FULL 8.5" X 11" PIC TO THE SLM804.
THE SAME PIC, PRINTED ON AN HP LASERJET FROM AN AT WITH AN 80287 (NORTON SI
12.5) TOOK OVER 20 MINUTES. AH, THE DMA IS GREAT (DESKTOP PUBLISHING ON A PC
MUST BE EXCRUTIATINGLY SLOW!!!)

Technical Details

Message-ID: <8909160329.AA26429@ucbvax.Berkeley.EDU>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cwjcc!tut.cis.ohio-state.edu!ucbvax!AECLCR.BITNET!01659

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cwjcc!tut.cis.ohio-state.edu!ucbvax!AECLCR.BITNET!01659
From: 01659@AECLCR.BITNET (Greg Csullog)
Newsgroups: comp.sys.atari.st
Subject: TOUCH UP QUESTION
Message-ID: <8909160329.AA26429@ucbvax.Berkeley.EDU>
Date: 16 Sep 89 03:29:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 10