🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.atari.st
Article #41369

Re: How To Partition Megafile 30 for ST/PC/Mac s/ware

#41369
From: Douglas Monk
Date: Tue, 27 Feb 1990 22:44
45 lines
2981 bytes
In article <1328@lzsc.ATT.COM> hcj@lzsc.ATT.COM (HC Johnson) writes:
>In article <1990Feb23.070236.20529@cunixf.cc.columbia.edu>, ia4@cunixd.cc.columbia.edu (Imran Anwar) writes:
[re. using hard drive partitions for PC and Macintosh emulators...]
>30 Meg total:
>	First for TOS, will be called C: 10 meg or so
>	Second for TOS, will be called D: 9 meg or so.  Or just one for 19 Meg.
>(16 meg max  for TOS 1.1)  Use TOS for  PC-Ditto.
>	Third for MAC, 1 meg: used to 'boot' up mac. -- read manual.
>	Forth for MAC, 9 meg: or more; use for data storage. (The more the better).

This is the method for using partitions for Magic Sac: for Spectre, you only
needd one partition. Magic Sac (with 64K ROMs) needs a small MAC partition (as
small as you can get - I used a 300K partition) in MFS mode, which will
contain a system and finder and a Hard Disk patch, used only long enough to 
boot from a second MAC partition in HFS mode. Spectre (with 128K ROMs) 
understands HFS partitions directly, and doesn't need the first "boot-strap" 
partition. Thus, the drive might be set up:
		With Magic Sac			With Spectre
Partition 1	10 meg GEM=TOS C:		10 meg GEM=TOS C:
	  2	10 meg GEM=TOS D:, MS-DOS	10 meg GEM=TOS D:, MS-DOS
	  3	.3 meg ACK=MFS Mac bootstrap	10 meg ACK=HFS Mac boot
	  4	9.7 meg ACK=HFS real Mac boot

>> [re: ramdisk now not working as G:]
There is a *possibility* that the problem may be due to an odd bug, if you
are using a hard drive with one of Atari's early host adapters, and also using
some particular hard disk driver. The effect of the bug is for all (or most)
of the TOS drive letters to be marked in use on bootup. Most ramdisks will only
install if their drive letter is free (on coldboot) (with some reset-proof ones
also checking to make sure their letter is marked (on warmboot)). If the bug
is present in your particular setup, you need something to set or clear the
drive letter mask. I have a program that will do that, and can also be used to
see to what the drive letter mask is set so you can test for the bug. Send me
email if you want a copy.

>Get another RAMDISK.

Might or might not work, if the problem is this particular bug. For those
others in the audience, if your ramdisks work, you don't have the problem.

>Howard C. Johnson

Doug Monk (bro@rice.edu)

Disclaimer: These views are mine, not necessarily my organization's.
Technical Details
Message-ID: <5328@brazos.Rice.edu>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sicilia!bro
References: <1990Feb23.070236.20529@cunixf.cc.columbia.edu> <1328@lzsc.ATT.COM>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sicilia!bro
From: bro@sicilia.rice.edu (Douglas Monk)
Newsgroups: comp.sys.atari.st
Subject: Re: How To Partition Megafile 30 for ST/PC/Mac s/ware
Summary: Magic Sac and Spectre methods are different
Keywords: Megafile 30, Atari ST, PC, Mac, Hard disk format, HOW?
Message-ID: <5328@brazos.Rice.edu>
Date: 27 Feb 90 22:44:31 GMT
References: <1990Feb23.070236.20529@cunixf.cc.columbia.edu> <1328@lzsc.ATT.COM>
Sender: root@rice.edu
Distribution: na
Organization: Rice University, Houston
Lines: 45