Okidata Microline 390 and the Atari ST

Article View: comp.sys.atari.st

Article #4231

#4231

From: SKOLODZIESKI
Date: Thu, 21 Sep 1989 18:29

14 lines
1026 bytes

	I have been having a problem getting my Okidata 390 to print graphics 
correctly with my 1040 ST. The problem seems to manifest itself most frequently
in the 24 pin emulation mode. The problem is being that 3 bytes (24 bits) of 
data are being sent to the printer to print a single column of dots. At some 
random time, so it seems to me at least, one of the 3 bytes gets droped and 
the entire rest of the line is screwed up, beause of byte misalignment. Does
anyone have the same problem or know of a fix. 

						Scott J. Kolodzieski 
						Stevens Institute of Tech.

					"skolodzieski@vaxc.stevens-tech.edu"
------------

Technical Details

Message-ID: <89821142951.20206e76.SKOLODZIESKI>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!VAXB.STEVENS-TECH.EDU!SKOLODZIESKI

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!VAXB.STEVENS-TECH.EDU!SKOLODZIESKI
From: SKOLODZIESKI@VAXB.STEVENS-TECH.EDU
Newsgroups: comp.sys.atari.st
Subject: Okidata Microline 390 and the Atari ST
Message-ID: <89821142951.20206e76.SKOLODZIESKI>
Date: 21 Sep 89 18:29:50 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 14