Elmtech Ltd. Graphics Board

Article View: comp.sys.atari.st

Article #4293

#4293

From: Dave Newton
Date: Sun, 24 Sep 1989 09:58

16 lines
1226 bytes

  I'd like to hear from anyone that has actually used the Elmtech graphics
board about its reliability, perceived speed, etc.  I'd especially like
to know about its SCSI adaptor, specifically whether or not I could hook
up an ICD SCSI/RLL convertor/controller and still use their drivers.

  Does the board require a resident program to access the SCSI and RS232 port?

  For those that don't know, as of 9/21, the conversion rate is 1.5798 dollars/
pound, bring the cost of the board (no p&h) to $1262 US or thereabouts.

-- 
David L. Newton       |      dnewton@carroll1.UUCP     | Quote courtesy of
(414) 524-7343 (work) |     dnewton@carroll1.cc.edu    | Marie Niechwiadowicz,
(414) 524-6809 (home) | 100 NE Ave, Waukesha, WI 53186 | Boston College.
[Q]: How many surrealists does it take to screw in a light bulb? [A]: The fish.

Technical Details

Message-ID: <621@carroll1.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!ginosko!gem.mps.ohio-state.edu!rpi!uwm.edu!marque!carroll1!dnewton

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!ginosko!gem.mps.ohio-state.edu!rpi!uwm.edu!marque!carroll1!dnewton
From: dnewton@carroll1.UUCP (Dave Newton)
Newsgroups: comp.sys.atari.st
Subject: Elmtech Ltd. Graphics Board
Message-ID: <621@carroll1.UUCP>
Date: 24 Sep 89 09:58:24 GMT
Reply-To: dnewton@carroll1.cc.edu (Dave Newton)
Organization: Carroll College-Waukesha, WI
Lines: 16