Re: How to increase the resolution on your monochrome monitor

Article View: comp.sys.atari.st

Article #4305

#4305

From: Richard Dankert
Date: Mon, 25 Sep 1989 03:14

17 lines
1235 bytes

In article <2519A362.14466@maccs.dcss.mcmaster.ca> art@maccs.dcss.mcmaster.ca (Art Mulder) writes:
>Could someone please mail me instructions on the hardware (software?)
>modification that will increase the resolution on the monicrhome monitor?
>I know that that has been discussed here a couple months back.
>thanks


	If some kind person has the instructions for the modification, 
would you mind sending this information this way also. I have TOS 1.4, 
the OVERSCN program and the source, but without knowing what to add/change
the gathered info is kinda useless. Please reply by Mail, our news feed
on our end screws up more than I like to see, but Mail always gets through.

	Many thanks.....

rich.....
UUCP: rich@lakesys.lakesys.COM     {always .... }

Technical Details

Message-ID: <1121@lakesys.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uwm.edu!lakesys!rich

References: <2519A362.14466@maccs.dcss.mcmaster.ca>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uwm.edu!lakesys!rich
From: rich@lakesys.UUCP (Richard Dankert)
Newsgroups: comp.sys.atari.st
Subject: Re: How to increase the resolution on your monochrome monitor
Message-ID: <1121@lakesys.UUCP>
Date: 25 Sep 89 03:14:29 GMT
References: <2519A362.14466@maccs.dcss.mcmaster.ca>
Reply-To: rich@lakesys.UUCP (Richard Dankert)
Organization: Lake Systems - Milwaukee, Wisconsin
Lines: 17

Reply to Parent Message