Article View: comp.sys.atari.st
Article #4575EPSON GRAPHICS on Pana 1124
From: terrell
Date: Wed, 04 Oct 1989 15:38
Date: Wed, 04 Oct 1989 15:38
21 lines
884 bytes
884 bytes
I'm having a little problem with my Panasonic 1124 printer: I have a program that generates a bitmapped image for EPSON compatible printers. On the 1124 all the bits seem to be in the right places, but the spacing between "lines" is too small. What I mean is that after the printer prints each row of graphics, it doesn't advance far enough for the next row. Consequently the rows all overlap. Any way to get the spacing correct??? Thanks in advance, Eric Terrell
Technical Details
Message-ID:
<9718@cadnetix.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!cadnetix.COM!terrellShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!cadnetix.COM!terrell From: terrell@cadnetix.COM Newsgroups: comp.sys.atari.st,comp.sys.ibm.pc Subject: EPSON GRAPHICS on Pana 1124 Message-ID: <9718@cadnetix.COM> Date: 4 Oct 89 15:38:35 GMT Sender: news@cadnetix.COM Reply-To: terrell@cadnetix.COM () Organization: Cadnetix Corp., Boulder, CO Lines: 21