Running from different environments different?????

Article View: comp.sys.atari.st

Article #4941

#4941

From: Marshall Lake
Date: Mon, 16 Oct 1989 02:25

22 lines
1318 bytes

I've come across something that seems strange to me that I hope
someone can offer some advice about.

I have a GEM program that reacts differently whether a hard drive is
is in place or not!?!?!?!?!?!  If the hard drive is allowed to boot
then this program runs fine whether I run it from floppy or the hd.
If the hd is not allowed to boot then this program will bomb at a
certain point in execution.

Can anyone offer any possible reasons why this would happen?

The only possibility I can come up with is that the hd
booting causes the program in question to be loaded into
a slightly different area in RAM.  Without the hd booting
the program in question could be violating some sort of 32K
boundary with its reference to a variable or a function.
With the hd booting might cause both the referencing area
and the referenced area to be in the same 32K block of RAM.
Does this sound far-fetched?

Marshall Lake
lake@ka3ovk.UUCP

Technical Details

Message-ID: <1989Oct16.022523.24911@ka3ovk.uucp>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!sharkey!cfctech!teemc!ka3ovk!lake

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!sharkey!cfctech!teemc!ka3ovk!lake
From: lake@ka3ovk.uucp (Marshall Lake)
Newsgroups: comp.sys.atari.st
Subject: Running from different environments different?????
Message-ID: <1989Oct16.022523.24911@ka3ovk.uucp>
Date: 16 Oct 89 02:25:23 GMT
Organization: Internal Revenue Service, Washington, DC
Lines: 22