🚀 go-pugleaf

In article <44999@ccicpg.UUCP> paulm@ccicpg.UUCP (tmp Paul Moreau usenet acct) writes:
>
>   I found out something last night:
>   PMFS will not work without DC's qstauto.prg in the auto folder!
>   I've mailed Ignac in hope of figuring this out.  Anyway, if yours
>   bombs, place qstauto.prg in the auto folder and reboot.  It should
>   work then.   MAKE SURE that the serial port of both systems is 
>   configured for 8 bit, no strip.

I was wondering if i should post a message asking if PMFS even works.
I have tried the posted version on my 286 to a 520 and all the atari
side just locks up. With DEBUG defined i see that pmfsu is getting 
checksum errors and re-trying. With the most recently posted version,
it gets a checksum, and then does not re-try. I have sent mail to 
the author, but have not received a response. Has anyone been able to
get PMFS to work between a 286 with SCO Xenix and a ST? I tried can
do Zmodem at 19.2K, but i brought the baud down to 4800 with the same
results. I think that the 286 side is creating a P.disk with bytes
that are swapped as far as the atari end is concerned.

>   I've got a cleaner version that the media change now works and I
>   can also work at 19200 Baud now.  If you're interrested, drop me a
>   line, else you can wait for me to get the qstauto thing figured out.

I have no idea what qstauto is, i lost everything i had when the harddrive
crashed and i can't afford a new drive.

>
> |  UUCP:  ...ccicpg!dl2!paulm   |      Paul L. Moreau       |
> |    or   ...ccicpg!dl1!paulm   | Diagnostics Software Eng. |
> |    or   ...ccicpg!paulm       |    Irvine, California     |


-- 
Mark Seiffert,  Metairie, LA.
uucp:           rex!mgse!marks
bitnet:         marks%mgse@REX.CS.TULANE.EDU
internet:       marks%mgse@rex.cs.tulane.edu