Prototyping board for the ST cartridge port

Article View: comp.sys.atari.st

Article #6634

#6634

From: Marcelino Bernardo
Date: Wed, 06 Dec 1989 05:14

16 lines
1010 bytes

Ignac A. Kolenko asks if there are prototyping boards available for the
ST's cartridge port.  In the June 1987 issue of Byte, there was an article
by Tim G. Hunkler on building an interface board for the cartridge port.
In it, he used a used a board from Douglas Electronics.

   Proto board Part number 33-DE40

   Douglas Electronics
   718 Marina Blvd.
   San Leandro, CA 94577
   (415)483-8770

Hopefully this place is still around.  Let me know how it works out.

Regards,
Marcelino Bernardo         mbernar@erenj.bitnet

Technical Details

Message-ID: <8912061925.AA15057@ucbvax.Berkeley.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!ERENJ.BITNET!MBERNAR

References: <INFO-ATARI16-REQUEST@WSMR-SIMTEL20.ARMY.MIL>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!ERENJ.BITNET!MBERNAR
From: MBERNAR@ERENJ.BITNET (Marcelino Bernardo)
Newsgroups: comp.sys.atari.st
Subject: Prototyping board for the ST cartridge port
Message-ID: <8912061925.AA15057@ucbvax.Berkeley.EDU>
Date: 6 Dec 89 05:14:48 GMT
References: <INFO-ATARI16-REQUEST@WSMR-SIMTEL20.ARMY.MIL>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 16

Reply to Parent Message