booting from floppy

Article View: comp.sys.atari.st

Article #6858

#6858

From: James Parker
Date: Tue, 12 Dec 1989 03:30

26 lines
1507 bytes

Boot from floppy with ICDBOOT software

I am having a problem trying to boot from the floppy disk while 
using the latest (at least I think the latest, less than 2 mths old)
ICDBOOT software with my hard drive.

According to the manual, if I depress Ctrl/Shift/Alt while booting, the
computer will boot from the floppy instead of autobooting from the
hard-drive.  I have a copy of ICDBOOT.prg in A:\AUTO folder but not in
C:\AUTO as instructed in the docs.

Well....no luck.
I have tried all combinations of softboot/hardboot, wait till the floppy
lite comes on and goes off, and so on as recommended in the ICD docs
that I got with the kit...and all I get is the default ROM desktop.
It doesn't autoboot from the hard-drive, but it doesn't read the floppy
either, it just comes up with the ROM 2-icon desktop.

The whole point was so I could boot from floppy on those rare occasions when
I wanted to use a GDOS application.  I have a stock 1040ST with TOS 1.4.
Can anyone shed any light on this situation?  (And I don't mean get G+PLUS!).

Thanx for any replies.

james parker

Technical Details

Message-ID: <101870@ti-csl.csc.ti.com>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!uwm.edu!cs.utexas.edu!sun-barr!newstop!texsun!pollux!ti-csl!vlsic2!parker

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!aplcen!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!uwm.edu!cs.utexas.edu!sun-barr!newstop!texsun!pollux!ti-csl!vlsic2!parker
From: parker@vlsic2 (James Parker)
Newsgroups: comp.sys.atari.st
Subject: booting from floppy
Keywords: boot, hard-drive, ICD
Message-ID: <101870@ti-csl.csc.ti.com>
Date: 12 Dec 89 03:30:35 GMT
Sender: news@ti-csl.csc.ti.com
Lines: 26