🚀 go-pugleaf

Four month ago I bought the assembled board from IKS.

The kit was preinstalled and all I had to do was to buildt in
the bw/color switch and connect about 15 cables inside the monitor.
This is not as easy than it seems: 
You have to work very carefully, and check things twice before
connecting them. If you are experienced it'll took about 3 hours 
to do all the stuff.
If it works : fine; if not : happy searching.

The bw quality is nearly the same as before the upgrade
but it very hard to work with 50 Hz color.
IKS recommends to execute a 50to60hz.prg as first file of your
AUTO folder.

If you have still questions, feel free to contact me.

----------------------+----------------------------+-----------------------
Wolfgang Bachhuber    |  woife@Germany.Sun.COM     |
Unix Group            |  FAX    (49)-89-46008-400  |  "If you had my job,
German Answer Center  |  Phone  (49)-89-46008-0    |  you'd drink too."
Sun Microsystems GmbH |                            |