🚀 go-pugleaf

In article <508@carroll1.UUCP> dnewton@carroll1.UUCP (Dave Newton) writes:
>
>   You couldn't fit an ST motherboard into a PC tower case because there
>would be no rooms for the drives?  What kind of drives do you have?  I
>didn't know there were drivers available for 300Meg removable drives 8-)
>
Well, I checked out the tower cases on my last "recasing binge".  Even
went to a local business computer show just to look inside of one.
The way they are designed, the motherboard sits on its side-edge on the
bottom of the case.  I can't remember where the power supply sits, but
the drives are at the top.  I don't think there is enough vertical room
for both the motherboard and what I consider a "good" set of drives (2
3.5 inchers with a drive B switchable with a 5.25 inch drive, and at
least one HD).

Of course, if you would like to buy me a case so I could experiment
with it, I'll send you my address.   :^)

Chris Freemesser, Rochester Institute of Technology | What I like :
BITNET: %clf3678@RITVAX   GEnie: C.FREEMESSER       | 1) My Atari ST
USENET: Just reply and hope it gets through         | 2) My '77 Mercury
Call the ACORN BBS (716)436-3078, 300/1200 baud     | 3) Coke Classic