Article View: comp.sys.atari.st
Article #30659Re: HELP needed with 5.25" drive hook-up
From: Hartmut Semken
Date: Wed, 10 Feb 1988 03:38
Date: Wed, 10 Feb 1988 03:38
17 lines
1228 bytes
1228 bytes
In article <8802040058.AA28448@ucbvax.Berkeley.EDU> SYSTEM@UVPHYS.BITNET (NIK ZAPANTIS) writes: >The DS jumpers go from 1 to 4 and the jumper is put in position #2. This could cause Your problem. Try all 4 settings. >All other jumpers were left where they were when this drive was on an IBM XT. >I have no special software to take care of the seek rate[...] >Both the ST and PC ditto cannot see the 5.25" drive[...] >I get a message, when I select B, to put disk B into drive A. Your 5 1/4 is not recognized; is the "in use" LED lit? No? Set DS-jumpers to #1. The LED went on for short? Hmm, sounds like the ST does not recognize the index-pulses; get Your oszilloscope and wath the lines :) hase -- Hartmut Semken, Berlin (West) (*east of West-Germany :-) hase@netmbx.UUCP ...!pyramid!tub!netmbx!hase
Technical Details
Message-ID:
<1284@netmbx.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!mcvax!unido!tub!tmpmbx!netmbx!haseReferences:
<8802040058.AA28448@ucbvax.Berkeley.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!mcvax!unido!tub!tmpmbx!netmbx!hase From: hase@netmbx.UUCP (Hartmut Semken) Newsgroups: comp.sys.atari.st Subject: Re: HELP needed with 5.25" drive hook-up Message-ID: <1284@netmbx.UUCP> Date: 10 Feb 88 03:38:01 GMT References: <8802040058.AA28448@ucbvax.Berkeley.EDU> Reply-To: hase@netmbx.UUCP (Hartmut Semken) Organization: netmbx Public Access Unix, Berlin Lines: 17