🚀 go-pugleaf

In article <1098@accuvax.nwu.edu> nims@accuvax.nwu.edu (Chris Nims) writes:

                      [header deleted]
>
>Wow, I didn't know they made any 1040's with an RF-modulator. Anyway,
>if you do indeed have an ST with a built in RF-modulator, then you
>already have the circuitry for composit built in. One of the pins on
>the monitor port is designated as composite video out if you have an
>RF mod. If you don't want to deal with making your own cable, etc,
>then you can buy something like Practical Soln's Monitor Master. It
>has a composite & audio out RCA jacks on it. If you're into playing
>with hardware, I'd just open the case & solder in 2 wires to the
>aprop. pins on the pc-board. 
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
>
>-Chris Nims
>nims@accuvax.nwu.edu


   Hey, would anybody happen to have the pin-outs for this?  Or is it just
so obvious that just one look and, hey there it is....?
   Also, don't you have to worry about attenuating the signal from this
port - I think I remember an earlier discussion (about Sony monitors) where
their input levels are not quite the same as the output from the ST?  Or is
it entirely case dependent upon the type of monitor you are hooking it to?
 
            
Mike
------------------------------------------------------------------------------
   mbaffoni@skat.usc.edu  (going away soon...)l (looking for something
or mbaffoni@castor.usc.edu                    l intelligent and witty?
or baffoni@aludra.usc.edu                     l Go look in the Mens Room...)
------------------------------------------------------------------------------
Fencing is like some relationships... you think you're doing fine until
Binnnnggg.... you get knocked in the head (or more somewhere more vulnerable)
and there you are, flat on your arse....