Article View: comp.sys.cdc
Article #41Re: Wanted.. any info on 26" disk drive platter
From: Joe Cychosz
Date: Tue, 11 Sep 1990 03:49
Date: Tue, 11 Sep 1990 03:49
56 lines
2888 bytes
2888 bytes
In article <6536@tekgen.BV.TEK.COM> ralphc@tekcae.CAX.TEK.COM (Ralph Carpenter) writes:
>
>An interesting reminder of my youth hangs on the wall of my
>cubicle: a 26" platter from a CDC 6600 disk drive that was
>decommissoned about 1973. I think the unit was a Bryan(t). As I
>remember, the heads were hydraulically driven. The story was
>that one job would periodically show up that put the mini-van
>sized unit into resonance and, unless the operator rolled that
>job out until some other jobs came along to randomize the head
>movement, the whole unit would hop until it moved off the holes
>in the raised floor.
>
You are right. It was from a Bryant disk, otherwise known as the
6603 disk. CDC did make a drive that had even larger platters
approximately 3'-4' in diameter. The University of Illinios use
to have one on there G20 system. I remember rolling the platter around
in the hallways of the EE building. They also made nice coffee tables.
One such table use to be at FermiLab.
Anyway, back to the Bryant:
Capacity: 56Mbyte
Weight: 4,300 lbs
Surfaces: 32 (4*9 - 4)
The unit had 4 quadrants. The quadrants were organized into a upper
half and a lower half. Each half used equal and oppsite positioning
to conteract arm movement.
The first unit was delivered to Livermore.
My friend Don Crouse who installed a good many of these drives has quite
a few stories about these drives. The most notable are:
1. One drive that was on its way to France fell out of the loading
bay of a 707 to the ground. Upon arivial in France, the drive
worked even though it was shaped more like a parrallelogram instead
of a box. The heads were wrapped and locked in there retracted
positions and survived the drop.
2. While installing a 6600 system in Mexico, one of the Bryants fell
through the floor.
The Bryant was the last of the big disk technology. Shortly after it
14" technology arived on the scene, which lasted up until a few years
ago (yes I know there are some 14" drives still in production, but
the majority are much smaller now).
If you get some of that magnetic partical material that they use to
evaluate magnetic tape media and spray it on a portion of your disk
you should be able to read the bits.
Joe
Bytes/lb is left as an exercise of the reader.
Technical Details
Message-ID:
<1990Sep11.034940.16212@ecn.purdue.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!noose.ecn.purdue.edu!cadlab.ecn.purdue.edu!3ksnn64References:
<6536@tekgen.BV.TEK.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!noose.ecn.purdue.edu!cadlab.ecn.purdue.edu!3ksnn64 From: 3ksnn64@cadlab.ecn.purdue.edu (Joe Cychosz) Newsgroups: comp.sys.cdc Subject: Re: Wanted.. any info on 26" disk drive platter Keywords: ancient,relic Message-ID: <1990Sep11.034940.16212@ecn.purdue.edu> Date: 11 Sep 90 03:49:40 GMT References: <6536@tekgen.BV.TEK.COM> Sender: news@ecn.purdue.edu (USENET news) Organization: Purdue University Engineering Computer Network Lines: 56