Reading 1/4 tape on a MASSCOMP which was written on SGI IRIS

Article View: comp.sys.concurrent

Article #124

Back to comp.sys.concurrent Previous Next

#124

From: Steven Fisher
Date: Sat, 24 Feb 1990 21:11

14 lines
882 bytes

I have been trying to read 1/4 inch cartridge
tapes from a masscomp, written in tar format, on my
Silicon Graphics Iris.  Both use the 150MB drives from
archive.  I get a checksum error when I try to read.  I
also have tried cpio.  The Iris uses SysV Unix.  Any ideas?

steve

E-mail:    scfisher@dtoa1.dt.navy.mil


Articles to: concurrent@soma.bcm.tmc.edu or uunet!soma.bcm.tmc.edu!concurrent
Administrative stuff: concurrent-request@soma.bcm.tmc.edu
Stan Barber, Moderator

Technical Details

Message-ID: <219@gazette.bcm.tmc.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!bcm!soma!concurrent-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!bcm!soma!concurrent-request
From: fisher@iris1.dt.navy.mil (Steven Fisher)
Newsgroups: comp.sys.concurrent
Subject: Reading 1/4 tape on a MASSCOMP which was written on SGI IRIS
Message-ID: <219@gazette.bcm.tmc.edu>
Date: 24 Feb 90 21:11:34 GMT
Sender: usenet@bcm.tmc.edu
Lines: 14
Approved: concurrent@soma.neuro.bcm.tmc.edu