🚀 go-pugleaf

LC-Term V5.0 is available now for $99.95 (site licenses and quantity
discounts available, etc.) from:

	The Boston Software Works
	120 Fulton Street
	Boston MA 02109
	(617) 367-6846

V5.0 has the following features the last freeware version (3.something)
lacked:

	Vastly improved script language (see sample below)
	Multiple session support (one session each on comm port and
	  printer port, up to eight sessions with Omninet LAN)
	Completely revamped keyboard handler, allows any key (except
	  SETUP and HOLD SCREEN) to be mapped to anything, and distinguishes
	  key, ctrl-key, shift-key, and ctrl-shift-key
	Telephone dialer directory
	The IBM PC version also supports LAT and provides full VT220
	  emulation, including 132-column mode (Rainbow version emulates
	  VT220 keyboard with VT102 screen)

To give you an idea of the flavor of the new script language, here is the
script to dial a Hayes-compatible modem.  This script is invoked by the
telephone directory processor:

;LC-Term script to dial a Hayes-compatible modem.
;Input variables:
;
;	"Phone Number"		number to dial
;	"StatusRow"		row on which to display status string
;	"StatusColumn"		column at which to display status string
;	"StatusWidth"		width of status field
;
;Copyright (C) 1988 by The Boston Software Works, Inc.
;All Rights Reserved

screen-visible(0)		; don't show modem chat

display-erase(@StatusRow@, @StatusColumn@, @StatusWidth@)
display(@StatusRow@, @StatusColumn@, "initializing modem")

:RESET

send-string("A")
pause(100)			; pause 100 milliseconds (1/10th second)
send-string("T")
pause(100)
send-string("\r")		; send carriage return

case("ERROR", "RESET",		; if modem says ERROR, try again
     "OK",    "DIAL",		; if modem says OK, go dial phone
     5000)			; but if neither happens within 5 seconds,
				; then try sending AT<return> again

display-erase(@StatusRow@, @StatusColumn@, @StatusWidth@)
display(@StatusRow@, @StatusColumn@, "re-initializing modem");
goto("RESET")

:DIAL
pause(250)
send-string("ATS111=0\r")
pause(250)

display-erase(@StatusRow@, @StatusColumn@, @StatusWidth@)
display(@StatusRow@, @StatusColumn@, "dialing")

send-string("ATDT@Phone Number@\r")

;Interpret the modem's response

case("CONNECT",      "CONN",
     "BUSY",         "BUSY",
     "ERROR",        "ERROR",
     "NO CARRIER",   "ERROR",
     "OK",           "ERROR",
     40000)
display-erase(@StatusRow@, @StatusColumn@, @StatusWidth@)
display(@StatusRow@, @StatusColumn@, "timed out")
goto("FAILED")

:BUSY
display-erase(@StatusRow@, @StatusColumn@, @StatusWidth@)
display(@StatusRow@, @StatusColumn@, "busy")
goto("FAILED")

:ERROR
display-erase(@StatusRow@, @StatusColumn@, @StatusWidth@)
display(@StatusRow@, @StatusColumn@, "unknown error occurred")
goto("FAILED")

:FAILED
message("call failed")
hangup()
display-clear()
script-quit()

;Here on successful completion

:CONN
display-erase(@StatusRow@, @StatusColumn@, @StatusWidth@)
display(@StatusRow@, @StatusColumn@, "connected")
display-ansi("\007")			; ring bell
pause(250)
display-clear()				; clear screen

screen-visible(1)			; re-enable screen output

-- 
Larry Campbell                          The Boston Software Works, Inc.
campbell@bsw.com                        120 Fulton Street
wjh12!redsox!campbell                   Boston, MA 02146