🚀 go-pugleaf

There are many ways to do this:
1) If you are trying to go from a Rainbow Running MS-DOS to an IBM PC
with a double sided dual density drive (a PC, XT or the bottom drive
in an AT) Then the easiest way is to FORMAT a disk on the PC as a
single sided disk (use the /1 switch) and then take the disk to the
rainbow to copy files to be read on the PC.  The disk should either be
a new disk, or it should be bulk erased before if is used for this
operation as the 96 TPI heads on the rainbow can not erase the data in
a 48 TPI track.

2)If the IBM PC has a high density drive (IBM PC/AT) then the easiest
thing to do is get the public domain RX50 driver for the AT.  This
will allow you do read the Rainbow disks directly on the AT.
 
*---Art
*
*Arthur T. McClinton Jr.     ARPA: ART@MITRE.ARPA
*Mitre Corporation MS-Z305   Phone: 703-883-6356
*1820 Dolley Madison Blvd    Internal Mitre: ART@MWVMS or M10319@MWVM
*McLean, Va. 22102           DECUS DCS: MCCLINTON
*

  =-=- This note is in response to yours which follows -=-=

Anyone out there know how to convert DEC files to IBM PC?  Let me know.
Jean T.