🚀 go-pugleaf

Rainbow EchoMail Digest                     Feb  7, 1990

In this issue:
  ERRATIC RAINBOWS


  Articles posted to either INFO-DEC-MICRO or comp.sys.dec.micro are
currently gatewayed automatically to the Rainbow Echo on Fidonet; thus,
you do not need to take any special action to respond to articles in
these digests.

  Please send reports of problems or suggestions for improvement of this
digest to GTHEALL@PENNDRLS.UPENN.EDU (ARPA Internet).
------------------------------------------------------------------------
Date:     02-06-90
To:       ALL
Subject:  ERRATIC RAINBOWS
From:     VERNON BAILEY

I have noticed several messages during January concerning erratic RB behavior.
This may be due to oxidation on the pins of the 8088.  The MOSTEK version
of the 8088 had silver plated pins.  Over a long period, oxidation will
build up and cause high resistance contact and will cause just such erractic
behavior.  I have had to do this 2-3 times to my RB over it's 7 year life.
Just carefully remove the 8088 and use a green eraser to clean the pins
on the chip and reinsert.  If you are using a V20 you wont have this problem.
I live on the Gulf Coast so I do not worry about static electricity but,
if you live where there is low humidity just keep yourself grounded to the
RB while you are cleaning the chip.  If there are any other MOSTEK devices
plugged in your motherboard, clean them as well.  Hope this helps, I know
it really buggs you trying to find the cause.  I found out because my son
was selling semi-conductor devices for TI at the time.  GOOD LUCK.

--- ConfMail V3.31
* Origin: The Pot of Gold - (703-359-6549) (1:109/103)

------------------------------