Is there a TCP/IP program for the Pro 350?

Article View: comp.sys.dec.micro

Article #289

Back to comp.sys.dec.micro Previous Next

#289

From: Wayne Hauber
Date: Mon, 23 Oct 1989 20:42

10 lines
879 bytes

Does anyone know of a TCP/IP package for the Pro 350?  We have quite a few
Pros connected to an ethernet here at ISU.  It would add a lot to life of
these machines if we could use TCP/IP to communicate with non-DECNET network
hosts.

Wayne Hauber
Programming Consultant/BITNET Inforep    | gawjh@isumvs.bitnet
Iowa State University Computation Center | gawjh@isuvax.bitnet
109 Durham Center                        | gawjh@ccvax.iastate.edu
Ames, Iowa 50011                         | (515) 294-9890

Technical Details

Message-ID: <686@elf1.iastate.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!dino!elf1!root

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!dino!elf1!root
From: GA.WJH@isumvs.iastate.edu (Wayne Hauber)
Newsgroups: comp.sys.dec.micro
Subject: Is there a TCP/IP program for the Pro 350?
Message-ID: <686@elf1.iastate.EDU>
Date: 23 Oct 89 20:42:59 GMT
Sender: root@elf1.iastate.EDU
Distribution: usa
Lines: 10