🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.dec.micro
Article #379

Rainbow EchoMail Digest

#379
From: George A. Theall
Date: Thu, 15 Mar 1990 13:46
59 lines
2628 bytes
Rainbow EchoMail Digest                     Mar 15, 1990

In this issue:
  RE: LA 50 ADVICE NEEDED        (2 messages)


  Articles posted to either INFO-DEC-MICRO or comp.sys.dec.micro are
currently gatewayed automatically to the Rainbow Echo on Fidonet; thus,
you do not need to take any special action to respond to articles in
these digests.

  Please send reports of problems or suggestions for improvement of this
digest to GTHEALL@PENNDRLS.UPENN.EDU (ARPA Internet).
------------------------------------------------------------------------
Date:     03-12-90 (07:57)
To:       BOB FULLER
Subject:  RE: LA 50 ADVICE NEEDED
From:     FRANK MALLORY

> Setport: when using the SETPORT program, my screen reads
> that the LA 50 is not on (it is) and the SETPORT changes
> are not made.

Sounds like something wrong with your copy of SETPORT.  You might try SETLA50
instead. > Feed: single sheets are not fully advancing, line by line.

>  Seems the patten is not gripping the paper firmly enough.
Take off the front cover, and you will see a lever with red head on the right.
Pull it toward the front to increase clearance between the print head and
the paper.  That might help by decreasing the drag against the paper.  But
the basic problem with these printers is that most have been in service for
many years and are wearing out.


---
* Origin: Silver Bullet - Silver Spring, Md. - 301-622-2247 (Opus 1:109/123)

------------------------------
Date:     03-12-90 (00:20)
To:       BOB FULLER
Subject:  RE: LA 50 ADVICE NEEDED
From:     GARY STEBBINS


BF>Setport: when using the SETPORT program, my screen reads that
BF>the LA 50 is not on (it is) and the SETPORT changes are not made.

I never had problem when I had my LA50.  Is the LA50 online (I know, this
seems obvious; but I frequently turned my LA50 on, loaded the paper, and
then ran SETPORT before turning it online)? If not, SETPORT will indicate
it's not on.  Are you using a full cable?  I don't think SETPORT cares about
the modem control signals, but that's always a possibility.

-gary-

---
* Origin: Glacier Peak Rainbow, Bellevue, WA - 206/644-8431 (Opus 1:343/3)

------------------------------
Technical Details
Message-ID: <9003151346.AA26863@remote.dccs.upenn.edu>
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!uwm.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!PENNDRLS.UPENN.EDU!GTHEALL

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!uwm.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!PENNDRLS.UPENN.EDU!GTHEALL
From: GTHEALL@PENNDRLS.UPENN.EDU (George A. Theall)
Newsgroups: comp.sys.dec.micro
Subject: Rainbow EchoMail Digest
Message-ID: <9003151346.AA26863@remote.dccs.upenn.edu>
Date: 15 Mar 90 13:46:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 59