Re: Pro 350 printer port

Article View: comp.sys.dec.micro

Article #584

Back to comp.sys.dec.micro Previous Next

#584

From: tmiller
Date: Fri, 24 Aug 1990 11:40

11 lines
1245 bytes

Bob:  If you connect pins 8 and 9 together you'll have a console port
on your PRO 350.  so, 1 is gnd,2&3 are the same as for the printer, 7 is
grounded, 4, 5 and 6 I can never keep straight but it helps put DSR into TRM 
sometimes.  Of course you will need a terminal too.  I have one cable which
I use as a printer cable and a console port cable because the printer doesn't
use 8 or 9.  If you turn the console off while it is plugged in it halts th
-e PRO as if a break were pressed.
  
                                                  Todd Miller
                                         tmiller@binah.cc.brandeis.edu
                                         tmiller@caos.caos.kun.nl

Technical Details

Message-ID: <0093BA9C.C70ABA60@BINAH.CC.BRANDEIS.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!rpi!bu.edu!snorkelwacker!mintaka!chaos.cs.brandeis.edu!TMILLER@BINAH.CC.BRANDEIS.EDU

References: <Added.kaog4US00Ui3Q_r096@andrew.cmu.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!rpi!bu.edu!snorkelwacker!mintaka!chaos.cs.brandeis.edu!TMILLER@BINAH.CC.BRANDEIS.EDU
From: tmiller@BINAH.CC.BRANDEIS.EDU
Newsgroups: comp.sys.dec.micro
Subject: Re: Pro 350 printer port
Message-ID: <0093BA9C.C70ABA60@BINAH.CC.BRANDEIS.EDU>
Date: 24 Aug 90 11:40:09 GMT
References: <Added.kaog4US00Ui3Q_r096@andrew.cmu.edu>
Sender: @chaos.cs.brandeis.edu
Reply-To: tmiller@BINAH.CC.BRANDEIS.EDU
Organization: Brandeis University
Lines: 11

Reply to Parent Message