🚀 go-pugleaf

New Pro 350 owners are so worried about the error codes I have reproduced 
the most common ones here.  These are taken from the P/OS handbook.  Note
that unless you want to buy new components all you can do is reseat connections!


	Code  	Problem area		Corrective Action

	000100  P/OS keyboard handler   1: Check cables and connections
					2: Reseat option modules in card cage.
 					3: Reset all IC's in sockets on system
					   module.
					5: Replace system module
					6: Reload Operating system.

	000200 	Terminal driver         [deleted]

	000300  Executive/general	If error occured on first
					access of RX or RD subsystem,
					check that subsystem is in order:

					1: Check cables and reseat
					   controller in card cage
					2: Replace Drive
					3: Replace RX or RD subsystem
					   controller

					If error not found on first access
					of mass storage, goto 000200
					corrective action.

	000400	System startup
		processing

	000500 Terminal driver
		(video and printer port)

Second line Error Codes

000000	IOT in system state
000001  Stack overflow or cannot install task CBOOT
000002  Trace Trap or breakpoint or cannot spawn task CBOOT
000003  Illegal instruction trap or cannot spawn task CBOOT
000004  Odd address or other trap to 4
000005  Segment fault
000006  A task on P/OS without a parent aborted
000007  EMT trap or required file not found
000010	TRAP trap