Help with QDA50

Thread View: comp.sys.dec.micro

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Mark Ward Wed, 08 Apr 1992 17:20

#75

Author: Mark Ward
Date: Wed, 08 Apr 1992 17:20

20 lines
1384 bytes


  I just got a couple of system industries cabinets, each with a 330mb smd
drive and a qda50 controller.  My question is, what is the qda50? is it
supposed to emulate (from a software pt of view) a uda50 on qbus systems?
Is it then software compatible with the kda50????

  Here's the plan: I've got a US Design Microvip  (Microvax 1 with 2mb ram,
scsi adapter, 140mb drive, and 1/4" tape drive).  I'd like to be able to 
connect the two smd drives to the microvip, but I'm not sure how.  I might
be able to get a qbus smd controller, but it seems like the qda50 might
be trying to do the same thing.  What, do I just run a cable from the QBUS
to the silly qda50, or do I need a card in the qbus to convert the signals
to then go into the si cabinet and (finally) come out smd????????

Extremely confused
-mark

ps if you have a qbus ethernet board and would rather have a unibus one, I'm
just the guy to talk to!

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads