Pro 350 to unload

Thread View: comp.sys.dec.micro

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by DDH104 Fri, 22 Mar 1991 17:51

#950

Author: DDH104
Date: Fri, 22 Mar 1991 17:51

12 lines
805 bytes

I have a Pro 350 that doesn't boot.
I never had a problem with it, but one day it just decided not to
boot up.  If anyone has any suggestions as to why this
would happen, please let me know.
When I turn the power on, the drives power up, and it just sits there.
I believe it runs on os 2.0 (or something like that)
Thanks.
-----------------------------------------
Drew Hershkowitz
DDH104@psuvm (BITNET)
ddh104@endor.cs.psu.edu
-----------------------------------------

Re: Pro 350 to unload

#956

Author: sjs
Date: Mon, 25 Mar 1991 19:26

14 lines
1119 bytes

In article <91081.125141DDH104@psuvm.psu.edu>, DDH104@psuvm.psu.edu writes:
> I have a Pro 350 that doesn't boot.
> I never had a problem with it, but one day it just decided not to
> boot up.  If anyone has any suggestions as to why this
> would happen, please let me know.
> When I turn the power on, the drives power up, and it just sits there.
> I believe it runs on os 2.0 (or something like that)
> Thanks.

Open it up and reseat the cables and slide the cards out and in.  Also give
it a good cleaning.  If you never see anything on the monitor (no logo or
diagnostics appear), it's either a bad video card or motherboard part.  If you
can blindly select options and can tell that they are working properly, then
it's the video.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads