Article View: comp.sys.dec
Article #1477Wanrouter-500 with X.25, Decnet, IP, PAD
From: Tetenyi Istvan
Date: Wed, 09 Sep 1992 06:28
Date: Wed, 09 Sep 1992 06:28
32 lines
1519 bytes
1519 bytes
Dear Colleagues,
We have recently bought a Wanrouter-500 Dec equipment. The router is
connected to an ethernet and to X.25. On the ethernet we use DECNET and
TCP/IP. A VAX 5100 (risc) machine is also connected to the network.
Basically this configuration is typical in three other places in
Hungary.
Colleagues from DEC state the following:
Either:
the wanrouter software provides:
PAD/X.25, DLM/X.25, OSI/X.25 directly.
But (!) it cannot route TCP/IP over X.25 without the help of
the VAX 5100 with the installation of a DECNET/IP gateway software.
Or:
The wanrouter provides:
DLM/X.25, OSI/X.25, IP/X.25
But there is no PAD (X.3, X.28, X.29) access at all.
What we really wanted was or is:
OSI/X.25, PAD/X.25, IP/X.25, Decnet(DLM)/X.25.
We could either have DECNET or DECNET/OSI etc.
Is anyone on the net who could clearify me the situation ?
Kind regards:
Istvan Tetenyi
Computer and Automation Institute,
Hungary
Technical Details
Message-ID:
<pista.147.716020139@aszi.sztaki.hu>Path:
arc1-ca.pugleaf.net!sparky!uunet!mcsun!sztaki!brunel.aszi.sztaki.hu!pistaReferences:
<pista.140.715605912@aszi.sztaki.hu>Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.dec,vmsnet.networks.management.misc,vmsnet.networks.misc,vmsnet.misc Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sztaki!brunel.aszi.sztaki.hu!pista From: pista@aszi.sztaki.hu (Tetenyi Istvan) Subject: Wanrouter-500 with X.25, Decnet, IP, PAD Message-ID: <pista.147.716020139@aszi.sztaki.hu> Keywords: networks, multiprotocol routing Lines: 34 Sender: news@sztaki.hu (News system) Organization: Computer and Automation Institute, Hungary References: <pista.140.715605912@aszi.sztaki.hu> Date: Wed, 9 Sep 1992 06:28:59 GMT