DL11 Current Loop Interface

Article View: comp.sys.dec

Article #3448

#3448

From: Bryan Cote
Date: Tue, 09 Apr 1991 15:43

14 lines
1352 bytes

I recently purchased a DL11 Current Loop (20ma) terminal interface for my
PDP-11/34. Unfortunatly I did not receive any documentation with this and
hence am unable to set the dip switches to a baud rate higher than 2400.
The board came pre-configured as a console so I was able to plug-and-play
but I am getting tired of the slow response.

If someone has the needed information to raise the baud rate I would appreciate
it very much. Feel free to E-mail or fax the info to (213)453-1435.

Thank you very much in advance.

----------------------------------------------------------------------------
Bryan R. Cote		INTERACTIVE Systems		Technical Support
----------------------------------------------------------------------------

Technical Details

Message-ID: <1991Apr09.154346.3998@ism.isc.com>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!ispd-newsserver!ism.isc.com!pandora!bryanc

References: <1991Apr5.062054.255@biivax.dp.beckman.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!ispd-newsserver!ism.isc.com!pandora!bryanc
From: bryanc@pandora.ism.isc.com (Bryan Cote)
Newsgroups: comp.sys.dec,comp.os.vms,vmsnet.misc
Subject: DL11 Current Loop Interface
Summary: Docs
Keywords: DL11, Current-Loop, 20ma
Message-ID: <1991Apr09.154346.3998@ism.isc.com>
Date: 9 Apr 91 15:43:46 GMT
References: <1991Apr5.062054.255@biivax.dp.beckman.com>
Sender: usenet@ism.isc.com (Ism Usenet News)
Reply-To: bryanc@pandora.ism.isc.com (Bryan Cote)
Organization: Interactive Systems Corp., Santa Monica, CA
Lines: 14

Reply to Parent Message