Needed: basic command set for Scholar(tm) modem

Article View: comp.sys.dec

Article #3668

#3668

From: Richard Joltes
Date: Fri, 17 May 1991 17:53

22 lines
1504 bytes

I recently purchased a used Scholar modem for use at home, but the manual I
got was for a Scholar Plus, and they don't seem to be compatible.  So two
queries:

1)  What's the basic command structure for the Scholar?  I can get response 
    from the modem but every time I hit any key (like "D" or something that
    seems like it should start a command) I get an immediate response from the
    modem (something like "D --> T") and can't complete the command.  Is there
    an escape or control sequence I need to know to get into command mode, and
    once there, what are the basic commands?

2)  Does anyone have a manual (xeroxed is fine) that they'd be willing to part
    with for a reasonable price, or would be willing to send some basic xeroxed
    pages from?

I'm stuck at 1200 baud until I get this thing working, so any help would be
appreciated...

Thanks,

Dick Joltes						joltes@husc9.harvard.edu
Harvard University Science Center

Technical Details

Message-ID: <1991May17.135352.1030@husc3.harvard.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!think.com!paperboy!hsdndev!husc3.harvard.edu!husc9.harvard.edu!joltes

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!think.com!paperboy!hsdndev!husc3.harvard.edu!husc9.harvard.edu!joltes
From: joltes@husc9.harvard.edu (Richard Joltes)
Newsgroups: comp.sys.dec
Subject: Needed:  basic command set for Scholar(tm) modem
Message-ID: <1991May17.135352.1030@husc3.harvard.edu>
Date: 17 May 91 17:53:50 GMT
Distribution: usa
Organization: Harvard University Science Center
Lines: 22
Nntp-Posting-Host: husc9.harvard.edu
Originator: joltes@husc9.harvard.eduLines: 23