Article View: comp.sys.dec
Article #3955Ultrix 4.3 / alternate console question
From: Steve Thompson
Date: Fri, 18 Dec 1992 20:01
Date: Fri, 18 Dec 1992 20:01
16 lines
1321 bytes
1321 bytes
I have just installed Ultrix 4.3 on a DECstation 5000/200-PXG. When this system ran 4.2A, the graphics screen/keyboard was also the console. However, I now want to use an RS232 terminal (attached to the left port) as console. This appears to work fine, with the exception that I can get no display on the graphics screen. All the relevant software is installed and is running OK (yes, I have checked that the monitor is turned on). Anyone seen this before? Steve --------------------------------------------------------------------------- Steve Thompson, System Mangler Internet: thompson@cheme.cornell.edu School of Chemical Engineering Bitnet: thompson@crnlchme Olin Hall, Cornell University Phone: (607) 255 5573 Ithaca NY 14853 ---------------------------------------------------------------------------
Technical Details
Message-ID:
<1992Dec18.200158.2820@tc.cornell.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!usc!rpi!batcomputer!vger.cheme.cornell.edu!OLINShow Full Headers
Complete Article Headers
Newsgroups: comp.sys.dec Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!usc!rpi!batcomputer!vger.cheme.cornell.edu!OLIN From: olin@vger.cheme.cornell.edu (Steve Thompson) Subject: Ultrix 4.3 / alternate console question Message-ID: <1992Dec18.200158.2820@tc.cornell.edu> Sender: news@tc.cornell.edu Nntp-Posting-Host: vger.cheme.cornell.edu Reply-To: olin@vger.cheme.cornell.edu Organization: Chemical Engineering, Cornell University, NY Date: Fri, 18 Dec 1992 20:01:58 GMT Lines: 16