🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.dec
Article #4032

Q-Bus equipment for sale.

#4032
From: Tim and Tim Company
Date: Tue, 04 Jun 1991 16:17
77 lines
3165 bytes

The following Q-bus equipment is posted for sale -


KDF11-B?     11/23+ processor w/current boot proms,                 $225.00
             "turbo charger", partial manual, and set-up.

             This processor has a transferrable RT11 V5 license,
             but you must have suitable load medium, or purchase
             one of the drives/controllers listed below.

KEF11-AA     Floating-point Instruction Set (FIS) for               $ 40.00
             11/23, 11/23+ processor.


BA 11-S?     Rack-mount BA11 box with 22-bit Q22/Q22 backplane.     $125.00
             Includes all rack hardware, and 11/23+ front panel.
             (will hold 9 quad or 18 dual cards!)  36A p/s.

BA 11-S?     Rack-mount BA11 *compatible* with 22-bit Q22/Q22       $ 40.00
             backplane.  25A p/s, front panel, NO RAILS.
             (will hold 11 quad or 22 dual cards.)

RQDX3-M      RD31/51/52/53/54/RX33/50 controller.                   $250.00
             This is a current revision controller.

RQDX1-M      RD51/RD52/RX50 controller                              $ 35.00
             (This is a Quad board)

RD52 -A      30MB MFM hard drive.                                   $125.00
             (This is a compatible.)

RD54 -A      154MB MFM hard drive.                                  $600.00
             (This is a compatible.)

DLV11-J      4-line asynch interface.  Console, Serial printer.     $ 40.00
             (Plessey card, has jumpers to enable either
              console interface, or serial printer interface.)

MFV11-A      Plessey special.  2 SLU's, optional front panel        $ 15.00
             interface (if you want to mess with it!), LTC
             registers, terminators, and boot proms.

???????      One memory board, in sad shape.                        $ 20.00
             192K, parity, Quad.

BDV11        Boot/terminator/diagnostic module.  Old.  Quad.        $ 20.00


If you purchase the processor, I will transfer the RT11 licence,
however, you must purchase one of the controller/hard drive
combinations, or have either RL01 or RL02 drives available.
I might consider RX50 distribution, as well.

RL01's - $20, RL02's - $ 30.  RX50's - $8.  

If you purchase the RQDX3/RD54, I will include the distribution panel.
If you purchase the RQDX1/RD52, the distribution panel is $25.  



**** prices do not include shipping. ****



Price reductions if you buy a system.  The only item I will
NOT be able to supply is a drive enclosure.  You will have
to supply your own drive case, and mounting for the drive
and distribution panel.


Contact:


Tim Thompson
414+764-6655 M-F, 2:00PM - 9:00PM, CST
Technical Details
Message-ID: <915@mixcom.COM>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!mixcom!xxwwxx

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!mixcom!xxwwxx
From: xxwwxx@mixcom.COM (Tim and Tim Company)
Newsgroups: comp.sys.dec
Subject: Q-Bus equipment for sale.
Message-ID: <915@mixcom.COM>
Date: 4 Jun 91 16:17:50 GMT
Reply-To: xxwwxx@mixcom.UUCP (Tim and Tim Company)
Distribution: usa
Organization: Milwaukee Information eXchange (Public access Usenet, Email)
Lines: 79