🚀 go-pugleaf

	Thanks to everyone who sent me addresses for booting the PDP-1134a.
Seems I'm gonna need a bit more help though.  Still won't boot...  Decided to
go through all my manuals and check to see if possibly some cards were missing
...  What I found out was that I have no idea... This poor thing was upgraded
too many times...  I needc to know what some of the cards do because I can't
find them in any of my manuals and I need to know if I need any other cards to
boot it up...  So here they go...
------------------------Mystery Cards------------------------
P/N1210711	This card has 44 chips on it and room for another 132...
		can't figure out what it does though...  Here's the stuff off
		the front of the chips too if it helps any: TMS 4532-20
		ZA1033-A3 P8044-P
M9312		This one has a 3-wire cable running to the console...
Rev D11 0066	I am totally !cxlue to what this one does.  Not even sure that
		is the card number.  It's just the closest thing I found...
		it has 4 26 pin connecters and 1 64 pin connect or in.
M7762		This one is connected to my drive cable so I figure it's some
		controller but I can';t find it in any of my books..
M8267		This one is plugged in next to the M8265 and M8266 cards and 
		has jumpers, connecting it to them.  I suspected it was some
		kind of coprocessor but the chips on it look more like 
		RAMchips...
--------------------------The Rest-------------------
M9302
M9202
M7856 (2 of them)
M7859
M8265 & M8266
And 2 serial connection cards...
----------------------------------------------------
Also I was wondering if I really need to have flip chips in every slot that has a blank place in the 3rd slot from the back...
-----------------------------------------------------
I'd really appreciate any info anyone can give me on this stuff.  I'm more
of a programmer than a tech... (As though it isn't obvious...)


------------------------------------------------------------------------------
---------------------------Three Laws of Programming---------------------------

1.  Any given program, when running, is obsolete.

2.  When putting it into memory remember where you put it.

3.  A computer program does what you tell it to do, not what you want it to do.

------------------------------------------------------------------------------
sspatter@uokmax.ecn.uoknor.edu (129.15.20.2)
Home phone: (918) 355-4121
Home address: 3223 S. 210 E. Ave. BA, OK 74014 (USA)
Current phone: (412) 421-0674
Current Address: 2613 Tilbury Ave, Pittsburgh, PA 15217 (USA)
------------------------------------------------------------------------------