🚀 go-pugleaf

In article <0094A10A.DFBFA200@EA.USL.EDU>, johnson@EA.USL.EDU writes:
> I have a pair of DEREP-RA remote ethernet repeaters used to link 2 thickwire
> segments via fiber optics.   This application is no longer needed, and so I 
> would like to use one of the repeater halves for something else.
> 
> I purchased a thinwire transceiver and want to plug it into the 'B'
> transceiver port on one of the DEREP halves.  
> 
> Each half has port 'A' which goes to a local thickwire transceiver, and
> a fiber connection and transceiver connection for port 'B'.  It seems,
> however, that currently I can only send information from port A to port B
> and not from B to A.  (it appears the transceiver port at B is dissabled)
> 
> Does anyone know how to enable that transceiver port at B.  There is
> a set of jumper pins located between the transceiver ports, but there is
> nothing said about it in the book.
> 
> Thanks for any help in advance.
> 
> Lee Johnson       hlj@usl.edu
Lee,
 
 Open the DEREP and remove the small piggy back board that contains
the fiber optic connectors. This will enable Port B for connection
to another transceiver.

 Good Luck,