Re: Making DEC RZ56 spin up on power up

Article View: comp.sys.dec

Article #4431

#4431

From: Shrewsbury ECAD group.
Date: Mon, 11 Jan 1993 15:14

17 lines
889 bytes

I can't recall if the RZ56 has a spin-up jumper or not. If it does not, then
you can use the rzdisk facility in Ultrix to set the appropriate bit in the
drive's firmware.

Joe



--------------------------------------
Joe Smith

Internet: joe@shr.dec.com                      UUCP: !decwrl!shr.dec.com!joe

Digital Equipment Corporation
Northeast Technology Center,
333 South St.
Shrewsbury, Ma. 01545-4112

Technical Details

Message-ID: <1is2t8INNrgi@usenet.pa.dec.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!dtix!darwin.sura.net!haven.umd.edu!decuac!pa.dec.com!cworld.shr.dec.com!smith

References: <8479@news.duke.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!dtix!darwin.sura.net!haven.umd.edu!decuac!pa.dec.com!cworld.shr.dec.com!smith
From: smith@cworld.shr.dec.com (Shrewsbury ECAD group.)
Newsgroups: comp.sys.dec
Subject: Re: Making DEC RZ56 spin up on power up
Message-ID: <1is2t8INNrgi@usenet.pa.dec.com>
Date: 11 Jan 93 15:14:48 GMT
References: <8479@news.duke.edu>
Reply-To: joe@shr.dec.com
Organization: Digital Equipment Corporation
Lines: 17
NNTP-Posting-Host: cworld.shr.dec.com

Reply to Parent Message