modem dial in AND out possible under Ultrix?

Article View: comp.sys.dec

Article #5456

#5456

From: Frank Fischer
Date: Fri, 15 Dec 1989 12:39

19 lines
1165 bytes

Hi,

I want to configure a MVAX II serial port for modem communication.
It should be possible to dial-in and to dial-out on the same serial
port.

I'm running Ultrix V2.2, the Modem is an ELSA Smart Box 2.

With SunOS this is possible by having 2 devices with the minor device
number of the incoming device set to  the minor device number of the out-
going device plus 128. Is something similar possible under Ultrix ?

Thanks in advance

Frank
ISA GmbH  -  Informationssysteme fuer computerintegrierte Automatisierung
Azenbergstr. 35, D-7000 Stuttgart 1, West-Germany, Phone: +49-711/22769-0
UUCP: ...{uunet!unido, pyramid}!isaak!fischer or fischer@isaak.UUCP
BITNET: fischer%isaak.uucp@unido.bitnet

Technical Details

Message-ID: <2197@isaak.isa.de>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!unido!isaak!isaak.uucp!fischer

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!unido!isaak!isaak.uucp!fischer
From: fischer@isaak.uucp (Frank Fischer)
Newsgroups: comp.sys.dec,comp.unix.ultrix
Subject: modem dial in AND out possible under Ultrix?
Message-ID: <2197@isaak.isa.de>
Date: 15 Dec 89 12:39:00 GMT
Sender: news@isaak.isa.de
Reply-To: fischer@isaak.uucp (Frank Fischer)
Organization: ISA GmbH, Stuttgart, West-Germany
Lines: 19