Re: Setting up LAT printers on DS3100... help...

Article View: comp.sys.dec

Article #5611

#5611

From: George Robbins
Date: Fri, 09 Feb 1990 18:51

18 lines
1387 bytes

In article <1990Feb9.034955.28337@hellgate.utah.edu> bob@cs.utah.edu (Bob Wheeler) writes:
> 
> Has anyone tried to do reverse LAT from a DECstation 3100
> to set up a printer?...
...
> Then I did a "lcp -h /dev/tty16:DENISE:PORT_19" to reserve the port
> for host initiated requests.

As a starting point, the lcp -h with server/port and the printcap entry are
more or less mutually exclusive.  lcp -h does a static association of the LAT
port with a tty device and the printcap entry does a dynamic assocation.

Try just using the lcp -h /dev/ttyXX form and see if that gets you any further.
You may get some message is your lp-error log file if you're lucky...
-- 
George Robbins - now working for,     uucp:   {uunet|pyramid|rutgers}!cbmvax!grr
but no way officially representing:   domain: grr@cbmvax.commodore.com
Commodore, Engineering Department     phone:  215-431-9349 (only by moonlite)

Technical Details

Message-ID: <9630@cbmvax.commodore.com>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!cbmvax!grr

References: <1990Feb9.034955.28337@hellgate.utah.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!cbmvax!grr
From: grr@cbmvax.commodore.com (George Robbins)
Newsgroups: comp.sys.dec,comp.unix.ultrix
Subject: Re: Setting up LAT printers on DS3100... help...
Message-ID: <9630@cbmvax.commodore.com>
Date: 9 Feb 90 18:51:52 GMT
References: <1990Feb9.034955.28337@hellgate.utah.edu>
Reply-To: grr@cbmvax.cbm.commodore.com (George Robbins)
Organization: Commodore, West Chester, PA
Lines: 18

Reply to Parent Message