Re: 2 Drives on VAXstation IIs

Article View: comp.sys.dec

Article #5685

#5685

From: Brian V. Smith
Date: Fri, 23 Feb 1990 19:08

24 lines
1570 bytes

In article <29consult@physc1.byu.edu>, consult@physc1.byu.edu writes:
> Has anyone ever successfully put two hard drives on a VAXstation II?  All
> the connectors seem to be there, but the manuals say it is not supported.
> I'm talking about a straight VAXstation II, not a II/GPX in the bigger
> cabinet.

You mean the BA23 box.  We wanted to connect a second drive AND KEEP THE
TK50, so we had to buy the drive in the "Leprechaun box" which contains
a power supply and front panel with the ready and write protect buttons.

> It looks like all that would be required is remove the TK50 or RX50s and
> find the right cables.  How would you connet a write protect and ready
> switch?  Or would they not be needed?
>

It might work since as you say there is already a connector inside for 
'drive 1'.
The power supply should be able to handle it unless you have a lot of
power hungry boards in the box.

_____________________________________
Brian V. Smith    (bvsmith@lbl.gov)
Lawrence Berkeley Laboratory
I don't speak for LBL, these non-opinions are all mine.

Technical Details

Message-ID: <4927@helios.ee.lbl.gov>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!hellgate.utah.edu!helios.ee.lbl.gov!epb2.lbl.gov!envbvs

References: <29consult@physc1.byu.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!hellgate.utah.edu!helios.ee.lbl.gov!epb2.lbl.gov!envbvs
From: envbvs@epb2.lbl.gov (Brian V. Smith)
Newsgroups: comp.sys.dec
Subject: Re: 2 Drives on VAXstation IIs
Message-ID: <4927@helios.ee.lbl.gov>
Date: 23 Feb 90 19:08:44 GMT
References: <29consult@physc1.byu.edu>
Sender: usenet@helios.ee.lbl.gov
Reply-To: envbvs@epb2.lbl.gov (Brian V. Smith)
Organization: lbl
Lines: 24
X-Local-Date: 23 Feb 90 11:08:44 PST

Reply to Parent Message