🚀 go-pugleaf

Hello all,

	I've got a few machines I still need to sell off. Everything
is fully functional, and I will offer a 30 day warranty. All of the 
workstations include a keyboard and mouse.

DECstation 5000/125, 16meg memory, HX graphics (2D accelerated 1280x1024)
TURBOchannel option, VR295 19" monitor. Built in SCSI and ethernet. The 
CPU is an R3000 at 25MHz. Currently there are no disk drives in it, but 
I can stuff something into an expansion box and load Ultrix onto it. 
I'm asking $1500. 
One thing I need to mention about the DS5000 is that the case is a little 
beat up. The system works perfectly. I can change this to a DECstation 5000/25 
in very good condition for an additional $250 to bring the price up to 
$1750. No licenses are included, but we might be able to work something 
out about swapping the system box for one with a license. Ask me for details.

VAXstation 3100/38 (3.8 VUPs), 32meg memory (the maximum you can stuff 
into a VAXstation 3100), SCSI controller, 8-plane 1024x864 color graphics, 
VR290 19" color monitor, RX23 floppy drive, RZ23 104meg SCSI drive, 
keyboard/mouse. $1750. Same thing with the licenses. 

VAXstation 3520:
1 CPU board with two KA650-style CPU chips, 16meg memory, 8-plane 
1280x1024 graphics, SCSI, ethernet, and three Q-bus slots. $1250.
Someone on the 'net has some 15" 1280x1024 monitors that I believe
will work fine with this machine, and he was asking $175. Email
me for details.

MicroVAX 3's:
I can offer a few different configurations. I have available a
BA213 non-DSSI, a BA123, and a few BA23's. I also have available a
choice between SCSI (disk only) and SDI -- I have two of each controller.
I have 4 RA70's available (all of which can fit into a BA123 and still
have room for the TK50), but no SCSI drives. I can get them pretty easily
though.

Here is a sample configuration:
VAXstation/VAXserver3500:
BA123 box
KA650-BA VAXserver/VAXstation CPU
3 MS650-AA memory boards for a total of 24meg memory
DELQA-M -- AUI connector -- supported by newer versions of VMS
2 DHV11 8-port multiplexors
TK50/TQK50
SDI disk controller with two RA70's
for $1750. Or replace the DELQA with a DEQNA and lower the price by $400.

If there is anything you would want to add to or change, I can get it.
I know these things inside and out and can get just about anything you
need. Heck, I even have a DSV11 with cabkit, if anyone does wide area
networking anymore. I think I have a third party parallel interface
with a Centronix-type connector for use with standard parallel printers.
I've also got Q-bus graphics cards and monitors.


One more thing. I have access to a couple DECsystem 5400's, with
64meg memory in each as well as two 1gb RA90's and a 300meg TK70.
Ultrix licenses are available. I can make these into VAX 4200's if 
they would be more appealing. Email me for details.

Need a VAX 6310 with licenses? Ask me about it.

That's it. I'm willing to go for quantity deals if anyone is interested
in more than one machine. I would be willing to throw in a 300meg disk
drive or two depending on what is purchased. Also, I can ship out of
the country.

I'm going to do an inventory some time in the next couple weeks.
If you want me to let you know what I have when I am done, email me.

Chris