Re: uVax II/BA23/BA123/RQDX/RX50 problem

Article View: comp.sys.dec

Article #60

#60

From: Bob Hoffman
Date: Mon, 02 Nov 1992 17:55

10 lines
897 bytes

Many thanks to all who responded.  It turned out to be an RTFM problem.
I also neglected to mention that the BA123 system had a DZQ11.  This
was the cause of the failure to boot from the second RQDX3.  According
to the chart on page 4-9 of the tech manual, if you have a DZ, the
address of the second MSCP controller changes from 760334 to 760354.
I misread this chart initially and didn't catch that dependency.

-- 
Bob Hoffman, N3CVL       pitt!hoffman
Pitt Computer Science    hoffman@cs.pitt.edu    FAX: +1 412 624 8854

Technical Details

Message-ID: <17242@pitt.UUCP>

Path: arc1-ca.pugleaf.net!sparky!uunet!destroyer!gatech!pitt!cs.pitt.edu!hoffman

References: <17198@pitt.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!destroyer!gatech!pitt!cs.pitt.edu!hoffman
From: hoffman@cs.pitt.edu (Bob Hoffman)
Newsgroups: comp.sys.dec
Subject: Re: uVax II/BA23/BA123/RQDX/RX50 problem
Message-ID: <17242@pitt.UUCP>
Date: 2 Nov 92 17:55:03 GMT
References: <17198@pitt.UUCP>
Sender: news@cs.pitt.edu
Organization: Univ. of Pittsburgh Computer Science
Lines: 10

Reply to Parent Message