setld on DEC systems

Article View: comp.sys.dec

Article #798

#798

From: Steve Kunz
Date: Thu, 19 Oct 1989 21:11

18 lines
815 bytes

Phil:

RE: Your query to comp.sys.dec

>  it is NOT installed as I expected so then I used
>
>                   setld /dev/rmt0h -a SUBSETNAME
>
>  to try to load the software.  The system obviously searches the entire

I have used setld successfully to install software subsets on a
MicroVAX 2000 running ULTRIX.  Are you sure you are issuing the
setld command properly?  My docs say it should be as follows:

     setld -a /dev/rmt0h SUBSETNAME

Steve Kunz
GR.SLK@ISUMVS.IASTATE.EDU

Technical Details

Message-ID: <685@elf1.iastate.EDU>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!ux1.cso.uiuc.edu!dino!elf1!root

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!ux1.cso.uiuc.edu!dino!elf1!root
From: GR.SLK@isumvs.iastate.edu (Steve Kunz)
Newsgroups: comp.sys.dec
Subject: setld on DEC systems
Message-ID: <685@elf1.iastate.EDU>
Date: 19 Oct 89 21:11:34 GMT
Sender: root@elf1.iastate.EDU
Lines: 18