Re: Building xrn on a pmax

Article View: comp.sys.dec

Article #938

#938

From: Gardner Cohen
Date: Mon, 27 Nov 1989 17:52

50 lines
2451 bytes

jwb@lindenthal.cae.ri.cmu.edu (John Baugh) writes:

   I compiled xrn on a pmax and it seems to work (mostly) fine.
   However, when trying to compile I lacked some /usr/include/X11
   headers that I subsequently grabbed from a convenient place.  These
   included Dialog.h, Box.h, Scroll.h, etc. (Athena widgets?)

Someone else mentioned the correct place to find the include files,
which I think are not installed by default.  I think the
/usr/include/mit stuff is on the 'unsupported' tape.

   In addition, there are certain operations within my xrn that are
   broken, like goto newsgroup, save article, and some others.  By
   broken I mean xrn goes off into never-never land---I think these
   operations are *supposed* to prompt the user for information.
   Perhaps the versions of the header files I snarfed don't match my
   libXaw.a???

Check config.h.  The latest version of xrn has a #define that
addresses your problem.  Popups dumped core before we did this.

*** config.h~	Thu Nov  2 23:02:21 1989
--- config.h	Thu Nov  2 23:36:20 1989
***************
***************
*** 133,141 ****
   * if popup dialogs cause core dumps or behave strangely, define
   * ACCELERATORBUG - you will need to do this if you have not installed
   * MIT patch #8 - this is the case for DEC UWS 2.1 (ULTRIX/RISC) 
   */
! /* #define ACCELERATORBUG */
  
  /* #define TRANSLATIONBUG */	/* DEC (VMS) X windows release */
  /* #define ERRORBUG */		/* DEC (VMS) X windows release */
  
--- 133,141 ----
   * if popup dialogs cause core dumps or behave strangely, define
   * ACCELERATORBUG - you will need to do this if you have not installed
   * MIT patch #8 - this is the case for DEC UWS 2.1 (ULTRIX/RISC) 
   */
! #define ACCELERATORBUG /**/
  
  /* #define TRANSLATIONBUG */	/* DEC (VMS) X windows release */
  /* #define ERRORBUG */		/* DEC (VMS) X windows release */

Also, don't forget to set the DOMAIN and HIDDENNET stuff (unless you
create all the strange config files that xrn wants).  Otherwise, any
articles you post look like they came from Berkelely.
-- 
Gardner Cohen     beldar@mips.com

Technical Details

Message-ID: <32210@rimulac.mips.COM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!apple!bridge2!mips!beldar

References: <7095@pt.cs.cmu.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!apple!bridge2!mips!beldar
From: beldar@mips.COM (Gardner Cohen)
Newsgroups: comp.sys.dec
Subject: Re: Building xrn on a pmax
Message-ID: <32210@rimulac.mips.COM>
Date: 27 Nov 89 17:52:00 GMT
References: <7095@pt.cs.cmu.edu>
Lines: 50

Reply to Parent Message