Article View: comp.sys.dec
Article #820Setting up a DECnet database on DS3100
From: wright
Date: Thu, 26 Oct 1989 11:51
Date: Thu, 26 Oct 1989 11:51
18 lines
1403 bytes
1403 bytes
We are running DECnet through out our building using ethernet. We have many
VAXens, over 200, from clustered workstations to 11/785s and 8600s. We have
included some DS3100s on our network, these all run DECnet also. Between the
Vaxes we can copy the permanent database, I have not seen a copy command in NCP
to move the database from the VAX to the ULTRIX workstations or for that matter
between ULTRIX workstations.
My question: Is there a command to move the database between ULTRIX machines
or VAX to ULTRIX without having to define/set each node.
--
+----------------------------+-----------------------------------------+
| Dave Wright | Phone: (714) 952-6320 |
| McDonnell Douglas M&E | Internet: wright@mdcbbs.com |
| Software Engineering | UUCP: uunet!mdcbbs.com!wright |
| P.O.Box 6011 | PSI: PSI%31060099980019::WRIGHT |
| Cypress, Ca. 90630 | |
+----------------------------+-----------------------------------------+
Technical Details
Message-ID:
<558.2546efdd@mdcbbs.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!ginosko!uunet!mdcbbs!wrightShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!ginosko!uunet!mdcbbs!wright From: wright@mdcbbs.com Newsgroups: comp.sys.dec Subject: Setting up a DECnet database on DS3100 Message-ID: <558.2546efdd@mdcbbs.com> Date: 26 Oct 89 11:51:57 GMT Organization: McDonnell Douglas M&E, Cypress CA Lines: 18