Thread View: comp.sys.dec
3 messages
3 total messages
Started by petepdx
Thu, 19 Oct 2006 16:20
146GB's in DS20 and a DS20E any reason why not ?
Author: petepdx
Date: Thu, 19 Oct 2006 16:20
Date: Thu, 19 Oct 2006 16:20
8 lines
1467 bytes
1467 bytes
Anyone tried it or know if or if can not be done ? The DS20 I have has split busses, each going to KZPBA's (Qlogic ISP 1040B's). The CDROM is on its own controller. -pete
Re: 146GB's in DS20 and a DS20E any reason why not ?
Author: Jack Estes
Date: Fri, 20 Oct 2006 08:17
Date: Fri, 20 Oct 2006 08:17
15 lines
1806 bytes
1806 bytes
Do you mean adding 146GB u320 drives to a DS20? There's no problem doing that as long as your SRM firmware is modern and the KZPBAs are healthy. I've run a 300GB drive in one with no issues. Jack petepdx wrote: > Anyone tried it or know if or if can not be done ? > > The DS20 I have has split busses, each going > to KZPBA's (Qlogic ISP 1040B's). > > The CDROM is on its own controller. > > -pete
Re: 146GB's in DS20 and a DS20E any reason why not ?
Author: petepdx
Date: Fri, 20 Oct 2006 15:42
Date: Fri, 20 Oct 2006 15:42
24 lines
2156 bytes
2156 bytes
I didn't think there would be, but one never knows, esp with the 'interesting' design the BA35x,et.al. have SRM etc upgraded to the 7.1 CD. Thanks .. -pete "off to buy some 146's or 300's" Jack Estes wrote: > Do you mean adding 146GB u320 drives to a DS20? There's no problem > doing that as long as your SRM firmware is modern and the KZPBAs are > healthy. I've run a 300GB drive in one with no issues. > > Jack > > petepdx wrote: > > Anyone tried it or know if or if can not be done ? > > > > The DS20 I have has split busses, each going > > to KZPBA's (Qlogic ISP 1040B's). > > > > The CDROM is on its own controller. > > > > -pete
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads