🚀 go-pugleaf

Andrew Brown wrote:
> 
> Ross Walker (walker@elec.uq.oz.au) wrote:
> :
> : Ran the install disk which added the following lines to config.sys:
> : device=c:\sbcd\drv\sbide.sys /D:msc001 /p:1E8,11 /v
> :
> : and autoexec.bat:
> :
> : c:\sbcd\drv\mscdex.exe /d:msc001 /m:8 /v
> :
> : When dos is booted, the sbide.sys cannot find the CDROM and fails to
> : load. Thus mscdex.exe also fails to load.
> 
> Are you sure that "msc001" is correct?  Most Creative CD's I've seen use
> a different name, something like "mscd001", I'll have to double check at home.
> Also, what does the /v switch do on the sbide.sys file?
> 
> On the mscdex.exe line, don't forget to add the /L:<drive letter> switch.
> Finally, /m:<buffers> should be at least 20-25.
> 
> Andrew B.
> :


The /p:1e8,11 could be the key.  This is valid only if you are running 
the IDE off the soundcard as a tertiary IDE channel.
If off the primary IDE it is usually Int 14  and the secondary uses 
/p:170,14
The /V option displays connection details.

John