🚀 go-pugleaf

C.M.Porter wrote:
> =

> In article <825457405snz@longley.demon.co.uk>, David Longley
> <David@longley.demon.co.uk> wrote:
> > Just for the record, I've struggled with a similar problem except on mi=
ne,
> > it reads the first half of the disk fine, the second half produces read=

> > errors. Like you I feel peeved that it's only worked for a year, and du=
ring
> > that period it's had only light use (good marketing trick CD-ROMs !).
> >
> > Mind you - I haven't given up....I am after the motors...so anyone who =
has
> > junked their 562 or 563 please contact me for an address to send your m=
otors
> > to, I'm not sure if there are one or two, but they *are* very small.
> > --
> > David Longley
> =

> I have also had trouble with a CR562 if first failed intermittently the s=
toped
> working all together I carefully stripped the spindal motor and found tha=
t the
> contacts on the comutator were clogged up with metal. I cleaned out the g=
aps
> with a pin and its been working fine for the last 6 monthes
> =

> Chris Porter

I have a problem with CR562 too... Id does not failed intermittently, =

but simply it refuse to start spindle disk motor for some days.
When encouraged with my fingertips the disk motor start to work fine but
after a few days it stopped again end refuse to start....
Does the spindal motor of my CDROM need to be replaced ? Or only =

lubrificated ? I need help.... Every time i insert a cd-rom i'm not
sure if ti will work or not =A3##@@##=A3=A3grrr...