Thread View: comp.sys.ibm.pc.hardware.cd-rom
1 messages
1 total messages
Started by Demosa
Fri, 12 Apr 2002 02:05
Plextor drive behavior (Problem).
Author: Demosa
Date: Fri, 12 Apr 2002 02:05
Date: Fri, 12 Apr 2002 02:05
25 lines
2020 bytes
2020 bytes
This was written to the Plextor support, but it seems they know next to nothing on these problems. I have a Plextor PlexWriter 12/10/32S. Do these symptoms below indicate any possible fault with my drive ? 1. The tray vibrates when reaching full length. My other drives (Pioneer DVD and Ricoh RW doesn't have this sort of problem. Is it 'normal' for Plextor drives ? It seems to me that the tray have a bad physical mechanism. 2. During reading some CDs, it seem the drive went on full speed, then stopped, while the 'Disc' LED goes off and 'On' LED goes on; blinking in-between. This triggers the dirty CD blue screen message from Windows. Again, the same CD doesn't exhibit any problems in my other drives. 3. Audio extraction using "Exact Audio Copy" with 'Secure' parameter only achieve a maximum of 5X down to 1X. Again, none of the other two do this (Ricoh goes up to 15X using the same parameters, same CD). Thank you. -- Please remove "nospamthanks" to reply.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads