Re: %Q1 on Zoom V.34

Article View: comp.sys.ibm.pc.hardware.comm

Article #74

Back to comp.sys.ibm.pc.hardware.comm Previous Next

#74

From: Daniel (Doni) Rosenzweig
Date: Fri, 12 Jan 1996 03:28

22 lines
1448 bytes

OK... at%q1 works in V.34 mode only. Not even V.fc mode. 
According to Richard Town's posting

005    028       038   000   002
EQM    Receive   Awaiting confirmation
Value  Signal    of exact definition
(%Q)   (dB/M)    of each readout
       (%L)      but expected to be:     
                 Far   far   v34 pre-
                 echo  echo   emphasis level
                 delay level


On Thu, 11 Jan 1996, Daniel (Doni) Rosenzweig wrote:

> I saw a msg from Richard Town (who sometimes is on here) on fidonet where 
> he said that AT%Q1 on ROM 1.309 returns more info than plain %Q . I 
> haven't been able to use it... Maybe it's only the European version? 
> Truthfully, when I tested it I was on a v.32BIS connection.. Maybe it 
> only works V.34... I'll have to test it... 
> 
>

Technical Details

Message-ID: <Pine.SUN.3.91.960111222439.10480B-100000@itsop2>

Path: arc1-ca.pugleaf.net!news.cuny.edu!itsop2!drosenzw

References: <Pine.SUN.3.91.960111195922.5455A-100000@itsop2>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!news.cuny.edu!itsop2!drosenzw
From: "Daniel (Doni) Rosenzweig" <drosenzw@its.brooklyn.cuny.edu>
Newsgroups: comp.sys.ibm.pc.hardware.comm,comp.dcom.modems
Subject: Re: %Q1 on Zoom V.34
Date: Thu, 11 Jan 1996 22:28:39 -0500
Organization: City University of New York/University Computer Center
Message-ID: <Pine.SUN.3.91.960111222439.10480B-100000@itsop2>
References: <Pine.SUN.3.91.960111195922.5455A-100000@itsop2>
NNTP-Posting-Host: itsop2.its.brooklyn.cuny.edu
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
X-Sender: drosenzw@itsop2
In-Reply-To: <Pine.SUN.3.91.960111195922.5455A-100000@itsop2>

Reply to Parent Message