Re: Can't get my USR Courier to power-up in auto-answer mode

Article View: comp.sys.ibm.pc.hardware.comm

Article #78

Back to comp.sys.ibm.pc.hardware.comm Previous Next

#78

From: Stephan Somogyi
Date: Mon, 22 Jan 1996 16:29

15 lines
1169 bytes

In article <4dumtn$pkh@hpaar.wv>, john_vella@mentorg.com wrote:

> I need help getting my USR Couerier V.34 modem to power up in
> auto-answer mode.  I have checked DIP switch #10 and it *IS* set to have
> the settings read from NVRAM instead of the factory defaults.
[...]
> The AA light on the front lights up and a dump of the registers shows S0
> set to "001".  But when I turn off the power and then back on again a
> check of register S0 shows its value as "000" and the AA light is off.

The Courier doesn't save S0 state in NVRAM. You need to turn the #5 dip
switch on.

________________________________________________________________________
Stephan Somogyi       Plaste und Elaste aus Schkopau       Digital Media

Technical Details

Message-ID: <somogyi-2201960829410001@sh-sd.digmedia.com>

Path: arc1-ca.pugleaf.net!sh-sd.digmedia.com!user

References: <4dumtn$pkh@hpaar.wv>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sh-sd.digmedia.com!user
From: somogyi@digmedia.com (Stephan Somogyi)
Newsgroups: comp.sys.ibm.pc.hardware.comm,comp.sys.mac.comm,comp.dcom.modems
Subject: Re: Can't get my USR Courier to power-up in auto-answer mode
Date: Mon, 22 Jan 1996 08:29:41 -0800
Organization: Digital Media
Message-ID: <somogyi-2201960829410001@sh-sd.digmedia.com>
References: <4dumtn$pkh@hpaar.wv>
NNTP-Posting-Host: sh-sd.digmedia.com

Reply to Parent Message